Pin the barrel. Set the comb.Wound

Suzhou Quping E-commerce Co., Ltd. runs a small, deliberate music box works in the Suzhou workshop at No. 132 Zhangbin Hamlet Zhanggu Village, Liuwei Town, Sixian, Suzhou - 234000, China (CN), where pinned cylinders are set into tuned combs and every spring is wound by hand before a case is closed. Our bench crew keeps the old division of labour intact, one station handing a finished movement to the next, because a music box only sings when each stage respects the stage after it. Take a look at the six bench stations we offer →

Explore the bench works→

A pinned drum over a tuned comb, drawn in the shop itself.

Suzhou Quping E-commerce Co., Ltd. is a computer integrated systems design house by trade and a music box works by craft, and we bring the same systems discipline to both sides of the bench.

Our workshop does not chase volume. It follows a movement from its first brass blank to the last turn of a case screw, and it treats the working of that movement as a small system in its own right: a pinned cylinder firing tooth after tooth of a tuned comb under the steady resistance of a governor. Anyone who has watched a movement come alive knows the pleasure is in the order, not the noise.

The team behind MelodyPeace came to music boxes from computer systems design, where the same habits rule: define the interface, name every part, and test the seam. That is why our bench stations have names instead of job numbers, and why every case we close has passed the same six rounds.

A workshop built around six rounds

The bench is organised around six named rounds that every movement passes in order. Nothing skips ahead. A comb that has not been trued will not reach the drum, and a drum with a doubtful pin will not go on to a winding week.

What leaves the works

A movement that turns evenly, holds pitch across its register, and closes into a case whose joints you can run a thumb along without finding a gap. That is the whole promise, and it is repeated on every page of this site.

The bench stations

Six rounds, six hands, one movement

Each station below is a real station on our Suzhou floor with its own tools, its own checks and its own hand-over note. Every service name links to the detailed services page.

  1. Comb Bar Desk

    At the Comb Bar Desk we file every tooth of a steel comb to pitch, then true the bars against a reference set until the whole register sits even under the pluck. This is quiet, exacting work done before any drum arrives, and it decides whether a movement will sound honest.

  2. Drum Pin Rounds

    Drum Pin Rounds seat the brass pins into their drilled positions around the cylinder, each pin driven to a measured height so the comb is lifted by the same amount every time. A single proud pin would tick against a tooth for years, so we check the drum against a pin board before it leaves the station.

  3. Winding Weeks

    Winding Weeks gather the mainspring, the arbor and the ratchet into a single train and then wind it slowly across a full week of test load so the spring takes its set before a customer ever turns a key. We record how many turns each spring holds and how it holds them.

  4. Tune Check Days

    Tune Check Days are set aside for playing the assembled movement through the whole of its piece, again and again, while a listener marks any tooth that wanders or pin that drags. The findings go back to the Comb Bar Desk or the Drum Pin Rounds, never patched over at the listening bench.

  5. governor Sessions

    In governor Sessions the fan governor and its felt brake are fitted and adjusted until the movement keeps an even tempo from the first note to the final one. We tune the brake so the piece breathes the way the arrangement asks, fast where it should be fast and slow where it should rest.

  6. Case Polish Evenings

    Case Polish Evenings close the round, when a movement is set into its case and the veneer, the lid, the hinges and the winding escutcheon are brought to a finish by hand under bench light. The case is oiled, rubbed and checked for a clean seat before the box is boxed.

How a movement travels

From brass blank to a closed case

Every movement crosses the same four checkpoints, and every checkpoint has a written note attached to the movement card before the next stage may begin.

Input inspection

Brass stock, steel comb blanks and spring wire arrive at the works and are logged before they are touched. Blanks that distort or spring wire that kinks are set aside rather than worked around, because a fault at the input becomes a fault in the song.

Intermediate holds

Between rounds a movement sits in a felt-lined tray with its card, so a stalled job never loses its place and never borrows parts from a neighbour. This is the systems habit at work: every part is named, every tray is signed.

Play-through sign-off

No movement leaves the bench without a full play-through in front of a second pair of ears. The listener signs the card, notes the piece, the register and any remark, and the movement is either passed or returned to its station.

Case close and record

The case close is the final act, and the record of it travels with the box: the worker who polished it, the date it was closed and the piece it plays. A box that leaves us can always be traced back through the same card.

A design house that also keeps a bench

Computer integrated systems design and music box assembly are not as far apart as they sound. Both are about a chain of small, verifiable steps that hold together under use, and both reward the discipline of naming what you make. Our customers are gift brands, stationers and independent makers who need a small run of movements that behave the same way in every box.

Because we run a tight bench rather than a broad catalogue, we can take a piece and fit it to a comb register that suits it, then carry that movement through the same six rounds without subcontracting the parts that matter. You can read more about each round on the services page or write to us directly through contact.

  • Small runs, each movement carded and traceable to its station.
  • Comb tuning, pin setting and spring winding all done under one roof.
  • Case finishing and play-through sign-off before anything is boxed.
  • Plain spoken notes returned with every batch, not just a shipping label.

The workshop, plainly

We work at No. 132 Zhangbin Hamlet Zhanggu Village, Liuwei Town, Sixian, Suzhou - 234000, China (CN), on the same weekday rhythm you would find in any careful workshop: deep work in the morning, hand-over at midday, and the quiet, patient polishing saved for the end of the day. Visitors are welcome by appointment, and we ask that you bring a piece you want to hear.

If you are weighing a project and are not sure which round it needs first, start with the comb and the drum, because almost every other question follows from how the movement sounds at the bench. Our team can talk you through the trade-offs and will tell you plainly when a request belongs on another kind of bench altogether.

Reach the works by email at care@melodypeace.mom or by phone at +17328026489. We answer bench questions in plain language and we do not pass them to a call centre.

Case polish evenings run late in the week, when the bench is cleared, the light is low and a finished movement waits for the last clean seat it will ever take before it travels to a customer.

Bring us a piece, and a question

If you have a tune in mind, a movement that has gone quiet, or a run of cases that needs a bench behind it, the fastest way in is a short note. Tell us what you are making, how many you need and what the piece should sound like at its best. We will reply from the works with a plain answer.

Start a bench conversation →